Archive for October, 2010

This plot shows the response at the ends of an inside-out anode plane with 16 strips, to an 1mA current spot injected between the end (0) and the center of the central strip (16).
Strips are coupled at the ends with an inductance of 30nH (not optimized, but probably not too far). This inductance has no effect on DC, so all strips are biased with the same DC voltage. The responses are uniform within +/-12%.

inside_out_crosstalk

Anode plane response uniformity with inductive coupling terminations.

The link to the PSEC3 Tester Board  documentation