HEP System Administration

Unit  UnitType  Status         %Cmpl  Stripe  Size(GB)  Cache  AVerify  IgnECC
------------------------------------------------------------------------------
u0    RAID-5    DEGRADED       -      64K     1862.61   OFF    ON       OFF      

Port   Status           Unit   Size        Blocks        Serial
---------------------------------------------------------------
p0     DEVICE-ERROR     u0     465.76 GB   976773168     WD-WMASY8103731     
p1     OK               u0     465.76 GB   976773168     WD-WMASY8098447     
p2     OK               u0     465.76 GB   976773168     WD-WMASY8101621     
p3     OK               u0     465.76 GB   976773168     WD-WMASY8102807     
p4     OK               u0     465.76 GB   976773168     WD-WMASY8103606     
p5     NOT-PRESENT      -      -           -             -
p6     NOT-PRESENT      -      -           -             -
p7     NOT-PRESENT      -      -           -             -

Replaced disk in p0.

//cps2> info c2

Unit  UnitType  Status         %Cmpl  Stripe  Size(GB)  Cache  AVerify  IgnECC
------------------------------------------------------------------------------
u0    RAID-5    DEGRADED       -      64K     1862.61   OFF    ON       OFF      

Port   Status           Unit   Size        Blocks        Serial
---------------------------------------------------------------
p0     OK               -      465.76 GB   976773168     WD-WCASY7466065     
p1     OK               u0     465.76 GB   976773168     WD-WMASY8098447     
p2     OK               u0     465.76 GB   976773168     WD-WMASY8101621     
p3     OK               u0     465.76 GB   976773168     WD-WMASY8102807     
p4     OK               u0     465.76 GB   976773168     WD-WMASY8103606     
p5     NOT-PRESENT      -      -           -             -
p6     NOT-PRESENT      -      -           -             -
p7     NOT-PRESENT      -      -           -             -

//cps2> /c2/u0 start rebuild disk=0
Sending rebuild start request to /c2/u0 on 1 disk(s) [0] ... Failed.

(0x0B:0x0032): Unit is rebuilding
//cps2> info c2

Unit  UnitType  Status         %Cmpl  Stripe  Size(GB)  Cache  AVerify  IgnECC
------------------------------------------------------------------------------
u0    RAID-5    REBUILDING     0      64K     1862.61   OFF    ON       OFF      

Port   Status           Unit   Size        Blocks        Serial
---------------------------------------------------------------
p0     DEGRADED         u0     465.76 GB   976773168     WD-WCASY7466065     
p1     OK               u0     465.76 GB   976773168     WD-WMASY8098447     
p2     OK               u0     465.76 GB   976773168     WD-WMASY8101621     
p3     OK               u0     465.76 GB   976773168     WD-WMASY8102807     
p4     OK               u0     465.76 GB   976773168     WD-WMASY8103606     
p5     NOT-PRESENT      -      -           -             -
p6     NOT-PRESENT      -      -           -             -
p7     NOT-PRESENT      -      -           -             -

Hopefully, this will finish without problems. Must check back in a few minutes to make sure the %Cmpl is changing.

If you get a message like this every time you start OpenOffice:

and you know these files are bad or deleted or whatever and you no longer want them, you can tell openoffice to quit trying to recover them by deleting the file:

~/.openoffice.org/3/user/registry/data/org/openoffice/Office/Recovery.xcu

Use:

tr '\r' '\n' < infile > outfile